prompt to device

describe what it should do. Studio helps turn it into modules, editable firmware, and interfaces.

from idea to running hardware

01idea
02firmware
03modules
04upload
uploaded to Genesis
interfaceoptional
23.4°
room temp
48%
humidity

integrated development environment

starter kit

capabilities

modular hardware

build a light sensor that turns the leds on when the sun goes down

bluetooth

use a button on my board as a Bluetooth camera shutter for my phone

wifi web control

control an led strip from a web page on my phone, standalone on WiFi

smart home

make my led light controllable with Siri and the Apple Home app

usb shortcuts

turn three buttons into copy, paste and undo keyboard shortcuts

camera & vision

use my webcam to detect when i raise my hand and light up the board

mic & audio

flash the board when my computer mic hears a loud clap

dashboard

show my sensor readings as live gauges on a control panel

python analysis

find and count the peaks in my sensor signal with scipy

guides & reports

write a step-by-step guide for setting up and using my project

integrations

send a Slack message when the doorbell button is pressed

automations

flash a light on my desk when my overnight agent finishes

what people are building

light music

light music

an led matrix that pulses to whatever's playing.

open in studio
audio fft analyzer

audio fft analyzer

live frequency spectrum from the mic, on screen.

open in studio

camera tracking

track your hand on the webcam and drive a servo.

open in studio

oscilloscope dashboard

a live signal scope in the browser, from the adc.

open in studio

voice assistant

a mic that listens, transcribes, and answers back with ai.

open in studio
environmental sensor

environmental sensor

temp, humidity and air quality, served over wi-fi.

open in studio

the boards

Genesis Mini

Genesis Mini

4 ports
Genesis One

Genesis One

8 ports

external displays

round display

round display

square display

square display

rectangular display

rectangular display

program it how you like it

Axiometa Studio

Axiometa Studio

Describe any project you want to build, and Studio will generate the code for you. It's the fastest way to go from idea to a running sketch on your Genesis board.

START →
Arduino IDE

Arduino IDE

Don't worry, you are not locked-in every Genesis board works as a classic Arduino dev board, and AX22 modules plug straight into a breadboard.

START →

backwards compatible hardware

the genesis mini is an esp32-s3 dev board with full arduino support. the modules work with other boards too, so you're never locked in.